Contents; Technical Data - AEG SP 16 Mode D'emploi

ity or lacking experience and/or lacking expertise. children should be supervised to
ensure they do not play with the leads.
this device is not intended for commercial use.
any other use or modification of the device is considered improper and involves
significant risks. the manufacturer assumes no liability for damages due to improper
use.

Contents

be sure to verify contents immediately upon opening the product. check the product
and all parts for damage. Do not use a defective product or parts.
▪
Safety jumper leads with installed StartProtect with leD indicator
▪
bag
▪
operating instructions
Please include all relevant documentation to other users!

Technical data

the jumper leads meet the requirements of DiN 72553 and are suitable for wiring
system voltages from of 12 v.
the leads consist of insulated, copper-clad aluminium wires with fully insulated
terminal clamps.
Typ Item No.
SP 16 97215
SP 25 97216
* the electric conductance corresponds to a copper lead of this cross-section.
Cross-sec-
tion* / Length
16 mm /
2
2 x 3 m
25 mm /
2
2 x 3,5 m
For engine displacement
up to
Petrol Diesel
2500 cm -
3
5500 cm 3000 cm
3
GB
13
3