AEG Voxtel Roam Mode D'emploi page 5

5.2 Headset LED indicators
Steadily on: the wireless headset is unregistered.
Purple Flashing: the wireless headset is registered but the
base is not available (searching or out of range).
Steadily on: when the headset is seated in the base
and fully charged. Once the headset is successfully
registered, the blue light will flash on then off, for
about three seconds at a time and emit a long beep.
Long flashing: the wireless headset is in idle mode
Blue and off the base.
Double flashing: the wireless headset is on and if
the signal becomes weak, three short beeps will be
heard.
Continuously flashing: the wireless headset is ringing
and can be heard through the earpiece.
Steadily on: when the wireless headset is charging
on the base.
Long flashing: indicates that the battery is low, the
unit is not on the base. The headset will emit short
double beeps.
Red Double flashing: indicates that the battery is low
while the headset is in use and short double beeps
will be emitted.
Triple flashing: indicates powering on/off the headset
and three short beeps will be emitted through the
earpiece.
Toggling display: the wireless headset is in
registration mode. When the headset is registered
Red/blue
successfully, the headset will beep for around 2
seconds.
Meaning
5