Connecting The Power - FS IES3100-8TF Guide De Démarrage Rapide

NOTE: This product is intended to be mounted to a well-grounded mounting surface such
as a metal panel.

Connecting the Power

The Upper Panel of the switch indicates a DC inlet power socket and consists of one terminal block
connector within 5 contacts. Please follow the steps below to insert the power wire.
1. Insert positive/negative DC power wires into Contacts + and - for Power 1 and Power 2.
No. Name
+
1
2
3
2. Tighten the wire-clamp screws for preventing the wires from loosening.
6
18-60V DC
PWR1 PWR2
Description
Positive
Negative
Requiring good ground connection
18-60V
PWR1 PWR2
DC