Using The Fan; Cleaning And Maintenance - Inventum VST401W Mode D'emploi

Place the fan on a flat, stable surface. Clean the exterior of the fan using a slightly damp cloth and then wipe it with a dry cloth.
The fan is ready for use.
3

using the fan

Place the fan on a flat, stable surface. Insert the plug in a wall socket. Press the required position to switch on the fan. The position
switch has the following options:
0 = off
1 = slow
2 = medium
3 = fast
To switch off the fan, press [ 0 ].
Oscillation
This fan is able to oscillate (swerve to the left and right) for a better air displacement.
If you want to change the wind to an upward or downward direction, you can simply move the fan head upwards or downwards.
Adjusting the height of the pedestal
In order to adjust the height, loosen the pedestal adjustment nut and move the fan upwards or downwards. Properly hold on to the fan
when loosening the pedestal adjustment nut, so it cannot drop down unexpectedly. Re-tighten the pedestal adjustment nut when the
fan is at the required height.
3
2
1
0
operation
4

cleaning and maintenance

Before cleaning the fan, you must switch it off [ 0 ] and remove the plug from the socket.
• Wipe the exterior of the appliance with a slightly damp cloth and dry properly.
• If necessary, you can clean the protective guard using a vacuum cleaner (nozzle).
• Do not use aggressive or abrasive cleaning agents for cleaning the appliance.
• Never submerge the fan in water or any other liquid.
• English
12
Push in the oscillation pen to allow the fan to
oscillate.
If you want to stop the oscillation, simply pull out
the pen.
oscillation pen
manual tilting
Adjusting the height of the
pedestal