Before The First Use; Operating The Floor Fan; Cleaning And Maintenance - Inventum VVM401C Mode D'emploi

3

before the first use

Before using the fan for the first time, proceed as follows: carefully unpack the appliance and remove all packaging material as well as
any promotional stickers.
Keep the packaging (plastic bags and cardboard) out of reach of children.
After unpacking the appliance, carefully check it for external damage that may have occurred during transport.
4

operating the floor fan

Place the floor fan on a flat, stable surface. Check that the protective guards are properly fastened.
Insert the plug in a socket.
SWITCHING ON / OFF
Press one of the position buttons 1 to 3 to switch on the fan.
Position 0 = off
Position 1 = lowest position
Position 2 = middle position
Position 3 = highest position
Press position button 0 to switch off the fan.
TILTING
If you want to change the wind to an upward or downward direction, you can tilt the fan head upwards or downwards. Hold the handle
to move the fan upwards or downwards.
Warning: make sure the fan is switched off when changing the tilt position.
5

cleaning and maintenance

Before cleaning the fan, you must switch it off by pressing position button 0 and remove the plug from the socket.
• Wipe the exterior of the appliance with a slightly damp cloth and dry properly.
• If necessary, you can clean the protective guard using a vacuum cleaner (nozzle).
• Remove the front protective guard to clean the fan blade. Open the clamps and remove the screw on the bottom side
of the protective guard. Clean the fan blade with a slightly damp cloth and a mild detergent if necessary. Make sure no water enters
the motor casing. Properly wipe everything dry and reassemble the fan.
• Do not use aggressive or abrasive cleaning agents for cleaning the appliance.
• Never submerge the fan in water or any other liquid.
12
• English