Jackson Maxview Instructions D'assemblage, D'utilisation Et D'entretien page 3

Maxview Face Shield
™
Assembly, Operating, and Maintenance Instructions
Window Assembly
1. Insert the top center of the window on to the center of the crown while pressing on the window
release tab. The window should secure in place as in image (2)
2. Press the bottom of the window towards the top corner of the crown. The top corner of the
window should slide in-to the slot on the side of the face shield. Verify the corner of the window is
visible on the inside of the face shield as indicated on image (4).
3. Press the opposite side of the window towards the top corner of the crown as done for the other
side. The top corner of the window should slide in-to the slot on the side of the face shield. Verify
the corner of the window is visible on the inside of the face shield.
4. Pull the chin guard downwards to place the window between the tabs as indicated on image (6).
1
Insert the center of the
window at an angle while
pressing the release tab
on the crown.
4
Corner of the window is
visible on the inside of
face shield.
3
2
5
Corner of window is visible
on the inside of the helmet.
3
Push window towards the
top corner of the crown.
6
Pull chin guard downwards
to insert the window
between the tab.