Standards And Approvals - Epson OT-MC20 Manuel D'utilisation

All rights reserved. No part of this publication may be reproduced, stored in a retrieval system, or transmitted in any form or
by any means, electronic, mechanical, photocopying, recording, or otherwise, without the prior written permission of Seiko
Epson Corporation. No patent liability is assumed with respect to the use of the information contained herein. While every
precaution has been taken in the preparation of this book, Seiko Epson Corporation assumes no responsibility for errors or
omissions. Neither is any liability assumed for damages resulting from the use of the information contained herein.
Neither Seiko Epson Corporation nor its affiliates shall be liable to the purchaser of this product or third parties for damages,
losses, costs, or expenses incurred by purchaser or third parties as a result of: accident, misuse, or abuse of this product or
unauthorized modifications, repairs, or alterations to this product, or (excluding the U.S.) failure to strictly comply with Seiko
Epson Corporation's operating and maintenance instructions.
Seiko Epson Corporation shall not be liable against any damages or problems arising from the use of any options or any
consumable products other than those designated as Original Epson Products or Epson Approved Products by Seiko Epson
Corporation.
NOTICE: The contents of this manual are subject to change without notice.
© Seiko Epson Corporation 2014. All rights reserved.
For American Users:
!
WARNING:
This product contains chemicals, including lead, known to the State of California to cause birth defects or other
reporoductive harm. Wash hands after handling.

Standards and Approvals

Product Name: OT-MC20
Model Name: M328B
The following standards are applied only to the battery chargers that are so labeled. (EMC is tested using EPSON power
supplies.)
Europe: CE Marking
North America: FCC Class A, CAN ICES-3 (A)/NMB-3 (A)
CE Marking
The battery charger conforms to the following Directives and Norms:
Directive 2004/108/EC
WARNING
This is a Class A product. In a domestic environment this product may cause radio interference in whichcase the user may be
required to take adequate measures.
The connection of a non-shielded printer interface cable to this printer will invalidate the EMC standards of this device. You
are cautioned that changes or modifications not expressly approved by Seiko Epson Corporation could void your authority to
operate the equipment.
FCC Compliance Statement For American Users
This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to Part 15 of the
FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is
operated in a commercial environment.
This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the
instruction manual, may cause harmful interference to radio communications.
Operation of this equipment in a residential area is likely to cause harmful interference, in which case the user will be required
to correct the interference at his own expense.
2
EN 55022 Class A
EN 55024
IEC 61000-4-2
IEC 61000-4-3
IEC 61000-4-4
IEC 61000-4-5
IEC 61000-4-6
IEC 61000-4-11