Receiver Features; Playing Music - A.M.P gain Manuel D'utilisation

Charging for first time use
The Charging the battery before use is recommended but not required.
The receiver ships pre-charged, however initial charge will vary.
Connect cable to the USB slot of any PC or Mac. The status indicator will
be red while charging and will turn off when fully charged.

Receiver Features

Playing Music

Keys Function
Volume up
Volume down
Play next song
Play previous
Power on / off / Play/Pause/Phone call function
EN
Pair mode
Begin with receiver powered off. Push and hold Middle Function
Button (MFB) for 6-8 seconds until LED indicator alternates red and
blue. You are now in pair mode. See your phone/music device manual
for pair instructions.
* Note
- If the pairing is not successful, switch off receiver by pushing the MFB
for 3 seconds, and then re-pair according to the steps outlined above.
- After pairing is successful, paired devices will remember each other.
Unless pairing information is deleted, there is no need to pair again.
- The receiver will automatically connect with the latest paired device.
If you want to pair with another Bluetooth device, switch off the
Bluetooth function of the current Bluetooth device, and then pair and
connect it with the new Bluetooth device according to steps outlined
above.
Headset Mode
Standby mode:
• Double click MFB to use voice dial function
• Hold the MFB to use the last number redial function
Incoming call (ring) mode:
• Press the MFB to accept phone calls
• Hold the MFB to reject incoming calls
EN