Quick Start; Remote Control - INTEMPO IDS 05 Mode D'emploi

Hi, thanks for choosing InConcert from Intempo.
InConcert has been designed with ease of use in mind. However if you have any questions why don't you e-mail the Intempo Broken
Department on support@intempodigital.com, or you can IM electratempo and get your query answered in real time. We also love
a good chat so feel free to call us on +44 161 828 5243 as we would love to hear from you.
Remember to register your product online with intempo by visiting www.intempodigital.com and you will be automatically entered
into a monthly competition.

Quick Start

This section helps you get your new InConcert up and running in no
time at all.
Insert the connector from the power supply into the 'Power In' jack
on the back of InConcert. Make sure the power supply is plugged
into a wall outlet.
Turn on the InConcert using the on/off switch at the back.
Press the button on the speaker or remote control.
The Intempo logo on the front of the speaker will glow blue when
the power is on.
Insert the correct iPod dock cradle inside the docking bay.
Pop your iPod into the dock and press down until it is fully seated.
Turn on your iPod and choose your favourite song using the Remote
Control.
Set the listening level using the volume button on InConcert or the

Remote Control.

Note: To prevent damaging the speakers make sure the power of
your iPod or other audio device (iPod, MP3 players, CD player etc)
is turned OFF before connecting to your InConcert.
Line In Connections
The InConcert includes a line-in jack that lets you connect to and
listen to other devices, such as the iPod Shuffle, MP3 players, CD
players, portable DVD players and laptops.
To do this, just connect one end of the 3.5 mm stereo cable into the
line-in jack at the back of InConcert, and the other end to the
headphone or line out jack on your Shuffle or MP3, and then switch
on.
Remote Control
Before using the Remote Control you must
remove the factory-inserted plastic tab at the
bottom of the Remote. Carefully pull the entire tab
out of the battery tray to activate the Remote
Control, and make sure that the battery tray is
completely inserted before operating the Remote.
5