Warning And Safety Instructions - Miele Professional DOS G 7896 Mode D'emploi

Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 9
This machine complies with all
relevant legal safety requirements.
Incorrect use can, however, lead to
personal injury and damage to
property.
Read the operating instructions
carefully before starting to use this
machine. This way you will avoid the
risk of accidents and damage to the
machine.
Keep these instructions in a safe
place for reference, and pass them
on to any future user.
Please read the instruction book for
the machine that this unit is
connected to.
The DOS G 7896 should be
commissioned and then
maintained only by a Miele authorised
and trained service technician or other
suitably qualified and competent
approved person.
Do not install the machine in an
area where a danger of explosion
may be present
The DOS module must only be
connected to Miele machines with
the appropriate connections for it.
Contact your Miele dealer or Sales
office for advice on suitable machines.
Take care when handling liquid
agents and additives. These may
contain irritant or corrosive ingredients.
Do not use organic solvents as these
could cause an explosion.
Follow all relevant safety procedures
carefully. Wear protective gloves and
goggles.

Warning and Safety instructions

hydrochloric acid do not come into
contact with the steel outer casing of
the machine.
cleaning agents are flushed out
beforehand to protect both the
environment and children.
To avoid corrosion damage, ensure
that solutions or steam containing
Should this unit ever require
disposal ensure that all residual
The manufacturer cannot accept
liability for damage resulting from
improper use or operation.
The containers should be refilled or
replaced by new ones in good time.
The DOS indicator lamp on the
control panel of the machine to
which this unit is connected will
come on to remind you when this
needs to be done.
If you need to use the DOS module
for a different medium you must
make sure that all individual
components are thoroughly rinsed
out beforehand. Otherwise there is a
danger of hoses getting clogged up
by the build-up of viscous or pasty
residues.
7

Publicité

Table des Matières
loading

Table des Matières