Technical Data - BGS technic 9337 Mode D'emploi

TECHNICAL DATA

Voltage: 220-240 V ~50Hz
Power: 1300 W
No-load speed: 600 - 3000 rpm
Pad diameter: 180 mm
Main shaft thread: M14
Sound pressure level LpA: 89 dB (A)
Sound power level LwA: 100 dB (A)
Vibration level: ahd=8,88 m/s² / K=1,5 m/s²
Protection class: II
OPTIONAL ACCESOIRS
Polishing Hood Set, Ø180mm, 3 pcs.
(BGS 9337-1)
GENERAL SAFETY INSTRUCTIONS
•
WARNING! Read all safety warnings and all instructions. Failure to follow the warnings and
instructions may result in electric shock, fire and/or serious injury.
•
Save all warnings and instructions for future reference. The term "power tool" in the warnings
refers to your mains operated (corded) power tool or battery-operated (cordless) power tool.
WORK AREA SAFETY
•
Keep work area clean and well lit. Cluttered or dark areas invite accidents.
•
Do not operate power tools in explosive atmospheres, such as in the presence of flammable
liquids, gases or dust. Power tools create sparks which may ignite the dust or fumes.
•
Keep children and bystanders away while operating a power tool. Distractions can cause you to
lose control.
ELECTRICAL SAFETY
•
Power tool plugs must match the outlet. Never modify the plug in any way. Do not use any
adapter plugs with earthed (grounded) power tools. Unmodified plugs and matching outlets will
reduce risk of electric shock.
•
Avoid body contact with earthed or grounded surfaces such as pipes, radiators, ranges and
refrigerators. There is an increased risk of electric shock if your body is earthed or grounded.
•
Do not expose power tools to rain or wet conditions. Water entering a power tool will increase
the risk of electric shock.
•
Do not abuse the cord. Never use the cord for carrying, pulling or unplugging the power tool.
Keep cord away from heat, oil, sharp edges or moving parts. Damaged or entangled cords
increase the risk of electric shock.
•
When operating a power tool outdoors, use an extension cord suitable for outdoor use. Use of a
cord suitable for outdoor use reduces the risk of electric shock.
•
If operating a power tool in a damp location is unavoidable, use an earth leakage circuit breaker.
Use of an earth leakage circuit breaker reduces the risk of electric shock..
BGS technic KG
Bandwirkerstr. 3
D-42929 Wermelskirchen
Electric Rotary Polisher
Tel.: 02196 720480
Fax.: 02196 7204820
mail@bgs-technic.de
BGS 9337
www.bgstechnic.com
© BGS technic KG, Copying and further use not allowed