Black & Decker PW 1300 S Mode D'emploi page 9

WARNING. High pressure hoses, fi ttings and joints
are important for the appliance's safety. Use only
hoses, fittings and joints recommended by the
manufacturer.
WARNING. To ensure the appliance's safety, only
use the manufacturer's genuine parts, or other parts
which carry its approval.
WARNING. Unsuitable extension cables can be
dangerous. If an extension cable is used, it must be
suitable for outdoor use, and the connection must be
kept dry and off the ground. Use of a power cable
reel which keeps the socket at least 60 mm above
the ground is strongly recommended.
WARNING. Switch the appliance off and discon-
nect it from the power supply before assembly,
cleaning, adjustments, maintenance, storage and
transportation.
WARNING. Insert the pipe jet kit down to the red
mark before turning the appliance on.
GENERAL INFORMATION (FIG.1)/
PAGE 2
Use of the manual
The manual forms an integral part of the appliance
and should be kept for future reference. Please
read it carefully before installing/using the unit. If
the appliance is sold, the seller must pass on this
manual to the new owner along with the appliance.
Delivery
The appliance is delivered partially assembled in
a cardboard box.
The supply package is illustrated in fi g.1.
Documentation supplied with the appliance
A1 Use and maintenance manual
A2 Safety instructions
A3 Declaration of conformity
A4 Warranty regulations
Disposing of packaging
The packaging materials are not environmental
pollutants but must still be recycled or disposed of
in compliance with the relevant legislation in the
country of use.
TECHNICAL INFORMATION (FIG.1)/
PAGE 2
Envisaged use
This appliance has been designed for individual
use for the cleaning of vehicles, machines, boats,
masonry, etc., to remove stubborn dirt using clean
water and biodegradable chemical detergents.
Vehicle engines may be washed only if the dirty
water is disposed of as per regulations in force.
- Intake water temperature: see data plate on
the appliance.
- Intake water pressure: min. 0.1 MPa - max.
1 MPa.
- Operating ambient temperature: above 0 °C.
The appliance is compliant with the IEC 60335-1
and IEC 60335-2-79 standards.
Operator
The symbol illustrated in fi g. 1 identifi es the ap-
pliance's intended operator (professional or non-
professional).
Main components
B2 Lance
B3 Gun with safety catch
B4 Electric cable with plug (on models with
this feature)
B5 High pressure hose
B6 Detergent tank (on models with this fea-
ture)
B7 Oil cap (on models with this feature)
E Nozzle
F Detergent regulator (on models with this
feature)
G Pressure regulator (on models with this
feature)
L Water fi lter
Accessories (if included in the supply package
– see fi g.1)
C1 Nozzle cleaning tool
C2 Rotating nozzle kit
C3 Handle
C4 Brush
C5 Hose reel
C6 Water suction kit
C7 Pipe jet kit
C8 Large surface cleaning brush kit
C9 Adapter
C10 Screws
C11 Brackets
C12 Lever
C13 Detergent kit
C14 Wheels
C15 Lubricating grease tube
Safety devices
- Starter device (H)
The starter device prevents accidental use of
the appliance.
Warning - danger!
Do not tamper with or adjust the safety
valve setting.
ENGLISH
9