How To Use; Before Using For The First Time; General Operation - Russell Hobbs FP3100 Mode D'emploi

How to Use

This appliance is for household use only.

BEFORE USING FOR THE FIRST TIME

• Remove all packing materials, any stickers and the plastic band around
the power plug.
• To register your product, go to www.prodprotect.com/russellhobbs.
• Turn to "CARE AND MAINTENANCE" and clean the appliance, to remove
manufacturing dust, etc.
Note: Each time you plug in your Russell Hobbs food processor you may hear
a faint buzzing sound caused by the speed gauge resetting itself. This sound is
completely normal and indicates that your gauge is working properly.
PARTS
1. Speed control
2. Gauge
3. Motor unit
4. Spindle (part no. 2050200033)
5. Workbowl (part no. 2050200065)
6. Drive shaft
(part no. 2050200053)
7. Disc (part no. 2050200030)
8. Tab
GAUGE
• The gauge shows the speed of the blade in rpm (revolutions per minute).

GENERAL OPERATION

1. Place the motor unit on a dry, firm, level surface.
2. Route the cable so it doesn't overhang, and won't trip or catch.
3. Assemble the unit, and fit any accessories required according to how you
want to use it.
Check that the speed control is set to O.
4.
5. Put the plug into the power outlet.
6. Move the speed control to the 1 or 2 position to operate your food
processor.
Switch the appliance off by moving the speed control to the O position
7.
and unplug it.
8. Hold the speed control in the
in short, controlled bursts.
9. Release the control to stop.
9. Lid (part no. 2050200066)
10. Tube
11. Pusher
(part no. 20102000003802)
12. Chopping blade
(part no. 2050200052)
13. Dough tool
(part no. 20102000002403)
position to operate your food processor
5