Using The Fan; Inserting The Batteries In The Remote Control - Inventum VTO812WA Mode D'emploi

3

using the fan

INSERTING THE BATTERIES IN THE REMOTE CONTROL

The range of the remote control is approx. 5 metres at an angle of 30° in front of the fan.
speed
oscillation
Insert the two supplied AAA 1.5 Volt batteries in the remote control, as indicated in the drawing.
Do take the plus and minus symbols on the inside of the remote control into account.
The remote control has the same function keys as the fan's control panel.
Place the fan on a flat, stable surface. Insert the plug in a wall socket.
POSITIONS
The fan can be set to different speeds and wind types. These settings are indicated by means of the indicator leds on the control
panel. When the settings are changed, the display of the indicator leds also changes.
on/ off Press the button to switch on the fan. By pressing the button once more, you switch off the appliance.
speed With every press on the button you change the speed of the fan: low, medium or high.
timer Press the timer button to start the timer. The time period is increased in steps of 30 minutes when you repeatedly
press this key, up to a maximum of 7½ hours.
For example, if you want to set the fan to 5½ hours, press this button until the three indicator leds light up, 0.5h + 1h
+ 4h = 5½ hours.
All indicator leds switch off when the entire programme has been completed. If you want to stop the timer function
or set a new time, you must continue to press the timer button until all indicator leds are off.
When the fan is on, the timer can be used to switch off the fan automatically at the required time within the range
from 30 minutes to 7½ hours.
In stand-by mode, the timer can be used to switch on the fan automatically within the range from 30 minutes to 7½
hours.
wind type In addition to normal speeds, the fan can be set to a natural wind or soft breeze prior to sleeping.
The sleep position works in the same way as natural wind, but automatically slows down as the set time expires. In
this way you can calmly fall asleep without having to switch off the fan yourself.
high
sleep
medium
low
The fan blows continuously and thus imitates a natural wind by alternating the set speed with a lower speed. The
strength of the natural wind can be set by means of the speed button. At the highest speed [ high ], the speed
natural
alternates between high, medium and low. At the medium speed [ medium ], the speed alternates between
medium and low. And at the lowest speed [ low ], the speed alternates between low and complete standstill.
The fan continues to blow at the speed it was set: high, medium or low, until it is switched off.
normal
The fan remembers the last setting and will start with the wind type and speed that was last used.
on/ off
timer
wind type
The fan works in the same way as in the case of natural wind. For 30 minutes at high speed, then
30 minutes at medium speed and during the remaining time the fan will continue to blow at the
lowest speed.
For 30 minutes the fan will blow at medium speed and then at the lowest speed for the
remaining time.
During the entire set time period, the fan remains at the lowest speed.
batteries
13
English •