Flying Objects - Flexzilla CF10050F Mode D'emploi

Flexzilla Electric Operated, Oil-Free Portable Air Compressors
WARNING
RISK TO BREATHING
Dust or dust-like particulates caused by power-sanding, sawing,
grinding, drilling or any other construction-like activities can
contain contaminants that are harmful to breathe.
Always use your air compressor in a well-ventilated and clean
area.
Never breath the air that comes directly out of the air
compressor or air hose. This air is not suitable for breathing.
Always wear approved safety equipment. When performing
dust-creating activities, securely wear properly-fit face masks or
respirators.
If your feel ill from breathing while operating your air
compressor, stop and seek medical attention immediately.
WARNING

FLYING OBJECTS

Flying objects can cause injury to the eyes, head and other parts
of the body.
Air-powered equipment and power tools are capable of
propelling items (metal chips, fasteners and particulates) at high
speed into the air and could result in injury.
Always wear approved head and eye protection.
Never point the air stream at any part of your body, or at
another person or animal.
When operating the air compressor, make sure all other people
and animals maintain a safe distance.
Do not move the air compressor when the air tank is under
pressure.
Never use the air hoses to pull or move the air compressor.
Keep the air compressor on a flat surface.
DANGER
RISK OF CUTTING
Moving parts can cause severe trauma.
Keep hands and feet away from rotating parts, tie up long hair,
remove jewelry, and DO NOT wear loose clothing.
WARNING
Use caution to minimize risk of fire or explosion.
Improper care could lead to the air tank bursting or exploding.
Drain air tank daily or after each use to prevent moisture buildup
in the air tank.
Rust can weaken the air tank and cause leaks or bursting. If rust
is detected, replace tank immediately. Do not try to repair air
tank by welding, drilling or modifying it in any other way. These
modifications can weaken the air tank and cause a hazardous
condition.
If air tank develops a leak, replace air tank immediately. Never
repair, weld or make modifications to air tank or its attachments.
Never make adjustments to the factory-set pressures.
Never exceed manufacturer's maximum-allowable pressure
rating attachments.
Because of extreme heat, do not use plastic pipe or lead tin
solder joints for a discharge line.
4
BURSTING