Rdo Optical Dissolved Oxygen Setup Menu - Thermo Scientific Orion Star Guide D'utilisation

RDO Optical Dissolved Oxygen Technique
®

RDO Optical Dissolved Oxygen Setup Menu

Note: Refer to the Setup Menu section for the Setup Menu Table, which contains
a complete list of meter setup options and descriptions.
1 . From the measurement mode, press
2 . Press /
on the top line .
3 . Press to accept the selection and move the arrow icon to the middle line .
4 . Press /
the mg/L concentration resolution,
manual),
for the salinity compensation type (automatic or manual),
salinity correction value,
for the optical cap replacement countdown in days .
5 . Press to select the option and move the arrow icon to the bottom line .
6 . To scroll through a list of options on the bottom line, press
desired option is displayed . To enter a numeric value for an option on the bottom
line, press
7 . Press to accept the selection and move the arrow icon to the top line .
8 . Repeat steps 3 through 7 to change another dissolved oxygen setting or press
to return to the measurement mode .
EN-32
to scroll through the setup menu until
to scroll through
for the manual barometric pressure compensation value,
for the dissolved oxygen calibration type and
/ to adjust each digit and
Thermo Scientific Orion Star
.
for the % saturation resolution,
for the barometer type (automatic or
to move to the next digit .
and Star Plus Meter User Guide
™
is displayed
for the manual
/ until the
for