DigitalLife U2AUDIO7-1 Guide De L'utilisateur page 5

Product Preview
1. VOL+ / VOL-
2. MIC Mute
3. VOL Mute
4. Mic Mute LED
5. Power/ Activity LED
6. HEADPHONES
7. LINE-IN
8. FRONT
9. SURROUND
10. CENTER/ BASS
11. BACK
12. S/PDIF IN
13. S/PDIF OUT
14. USB Connector
15. MIC IN
Increases or decreases audio output volume.
To mute/un-mute microphone.
To mute/un-mute audio outputs.
When the microphone inputs are muted, the light will turn on.
The light will be on when the system is powered up.
Connect to headphone.
Connect to tape/CD/DVD Player, or other audio sources for output
mixing and/or recording.
Connect to Front speakers (via external amplifier).
Connect to Surround speakers while in 4/6/8 channel modes (via
external amplifier).
Connect to Center/Bass speakers while in 6/8 channel modes (via
external amplifier).
Connect to Rear speakers while in 8 channel mode (via external
amplifier).
Connect to the digital optical output of external audio device via a
Toslink cable. The signal only passes through to the S/PDIF OUT.
Connect to the digital optical input of an external audio device via
a Toslink cable.
Plugs into the system's USB port.
Mic (1) + Mic (2)