Hollow Shaft; Technical Data - Hengstler Ri 76 Td Instructions D'installation

Tel: +44(0) 1978 664722
NUMBER OF PULSES

TECHNICAL DATA

mechanical
74
www.rotaryencodersolutions.com | sales@rotaryencodersolutions.com
Incremental Shaft Encoders
Industrial types
■
Through shaft with up to diameter 42 mm
■
Short overall length with an outside diameter of only 76 mm
■
Easy installation by means of clamping ring
■
Operating temperature up to 100 °C
■
Application e.g.:
- motors
- printing machines
- lifts
50 / 100 / 128 / 250 / 256 / 300 / 314 / 360 / 500 / 600 / 720 / 900 / 1000 / 1024 / 1250 / 1500 / 2048 /
2500 / 3072 / 4096 / 5000 / 8192 / 9000 / 10000
Other number of pulses on request
Shaft fixation
Coupling
Shaft diameter
Mimimum length of mounting shaft
Front clamping ring
Rear clamping ring
Max. parallel shaft misalignment
with stator coupling A (flexible)
with 1x stator coupling N (torsionally rigid)
with 2x stator coupling N (torsionally rigid)
Absolute max. speed
Torque
Moment of inertia
Protection class (EN 60529)
Operating temperature
Storage temperature
Vibration resistance (IEC 68-2-6)
Shock resistance (IEC 68-2-27)
Connection
Housing
Weight
1 Other cable length on request
E N C O D E R S C O U N T E R S
Fax: +44(0) 1978 664733
Type RI 76 TD
Clamping ring, front or rear
stator coupling (hubshaft with tether)
15...42 mm (Available: 15, 16, 18, 20, 24, 25, 27,
28, 30, 32, 38, 40, 42 mm as well as
32 mm with Ø 15 ... 30, 35 mm with Ø >30 ... 42
corresponding to total length of encoder
±2.0 mm axial, ±0.15 mm radial
±0.5 mm axial, ±0.3 mm radial
±0.3 mm axial, ±0.2 mm radial
at 70 °C and IP64: 3 600 min
at 70 °C and IP64: 1 800 min
at 70 °C and IP40: 6 000 min
at 100 °C always: 1 800 min
3...10 Ncm (depending on version )
140...420 gcm 2 (depending on version)
Housing IP50, bearings IP40
Option: Housing IP65, bearings IP64
-25 ... +100 °C
-25 ... +100 °C
10 g = 100 m/s 2 (10 ... 2000 Hz)
100 g = 1000 m/s 2 (6 ms)
1.5 m cablel 1 radial
Aluminium
320 - 580 g (depending on version)
I N D I C A T O R S R E L A Y S

Hollow shaft

⁄ ⁄ ⁄
", 1 ", "
5 5 3
8 8 4
-1 für Ø 15 ... 25
-1 für Ø >25 ... 42
-1 für Ø 15 ... 42
-1 für Ø 15 ... 42
P R I N T E R S C U T T E R S