General Information - Fluke Comark N8004 Manuel D'utilisation

ENGLISH
COMARK N8004/N8006
OPERATING INSTRUCTIONS
1.

GENERAL INFORMATION

It is recommended that you read the safety and operating instructions
before using this instrument.
Notes:
N8006 is a RH/temperature handheld instrument using an integral sen-
sor; N8004 uses a separate RH/temperature probe (N81).
WARNING
TO AVOID ELECTRIC SHOCK DO NOT ALLOW ANY PROBE OR
SENSOR TO COME INTO CONTACT WITH LIVE ELECTRICAL
POWER CONDUCTORS WITH VOLTAGES IN EXCESS OF 30V AC
RMS OR 60V DC.
TO AVOID DAMAGE OR BURNS, DO NOT MAKE TEMPERATURE
MEASUREMENTS IN MICROWAVE OVENS.
DO NOT PLACE THE THERMOMETER IN A DISHWASHER AS IT IS
NOT DISHWASHER SAFE.
THE SYMBOL ON THE INSTRUMENT INDICATES THAT THE OP-
ERATOR MUST REFER TO THE WARNINGS GIVEN HERE.
CAUTION
Temperature Measurement Probes
This precision instrument has been designed for use with the
extensive range of Comark temperature probes. The use of
other probes may impair the performance and accuracy of the
instrument. Full details of Comark probes and sensors can be
obtained from Comark Customer Support department or your local
distributor. Repeated sharp flexing can break thermocouple probe
leads. To prolong lead life, avoid sharp bends or kinks in the leads,
especially near the connector.
6