Connection Of The Gateway With The Chaff Oteaux Room Sensor - CHAFFOTEAUX ChaffoLINK 3318889 Notice Technique D'installation Et D'entretien

5.4 Connection of the Gateway
with the Chaff oteaux Room Sensor
Once the installation
temperature regulation accessory
is complete, you can make the
connection with
Gateway.
Proceed with the connection as
follows:
1. Open the front panel of the
gateway by unscrewing the two
screws on the bottom of the
appliance (1) slightly turn the cover
towards yourself (2) and pull it
downwards (3).
2. Connect the other end of the
bipolar cable that is already
connected to the Chaff oteaux
Room Sensor to a BridgeNet Bus
input on the Gateway, using one of
the supplied connectors.
of the
the Chaff olink
220V
BUS BUS
TA1
B T B T
Gateway connection to the Chaff oteaux Room Sensor accessory
1.
3.
2.
1.
63