Jump Power 084-4066-0 Manuel D'utilisation page 10

FRONT BOUNCE
180 DEGREE BOUNCE
ALWAYS START YOUR JUMP AT THE CENTER OF THE TRAMPOLINE MAT.
WHEN YOU LAND MORE THAN 1FT OR 30.5CM AWAY FROM THE CENTER OF
THE TRAMPOLINE MAT, STOP YOUR JUMP IMMEDIATELY!!
RESTART YOUR JUMP AT THE CENTER OF THE TRAMPOLINE MAT.
ASSEMBLY INSTRUCTIONS
To assemble this trampoline all you need is our special spring loading tool provided with this
product. During periods of non-use, this trampoline can be easily disassembled and stored. Please
read the assembly instructions before beginning to assemble the product.
PRIOR TO ASSEMBLING
Please refer to next page for parts descriptions and numbers. The assembly steps use these
descriptions and numbers as reference for your convenience.
Make sure that you have all parts listed. If you are missing any parts, please contact the vendor's
customer service department at 1-866-567-4089.
To prevent any injuries to your hands from pinch points during assembly, please use protective
gloves to protect your hands.
1. Start with a low bounce.
2. Land in prone (face down) position and keep
hand and arms extended forward on mat.
3. Push off the mat with arms to return to
standing position.
1. Start with the Front Bounce position.
2. Push off with left or right hands and arms
(depending on which way you wish to turn).
3. Maintain head and shoulders in the same
direction while keeping your back parallel to
the mat and your head up.
4. Land in the Prone position and return to
standing position.
9