Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
EN
CONTENTS
14 Pictures and schemes
1
Introduction to the instructions and
warnings
This manual is only intended for qualified technical
installation personnel.
None of the information contained in this
document may be considered of interest to the
end user.
This manual refers to the wireless numeric code
keypads of the ROGER series H85/TDR for ROGER
automation control and other devices that are
within the specifications.
WARNINGS
Read the instructions carefully before installation.
In accordance with the relevant legislation,
installation should only be performed by qualified
service personnel.
Make the connections with the cables that are
suitable for the specified currents and voltages,
respect the technical specifications of the product.
CAUTION! These devices are sensitive to
electrostatic discharges, therefore avoid touching
the sides of the card and wires with your hands.
8
Page
2
Product description
8
The numeric code keypad allows for the activation
9
of the radio transmission only after having entered
9
an enabled code, i.e. one previously stored in the
9
memory of the keyboard: this makes the activation
10
of the device more secure, as well as the activation/
10
de-activation of the alarms.
configured as per the production standard to
10
work with fixed code ROGER radio receivers (H93/
11
RX22A/I, R93/RX12A/I and R93/RX12A/U). It is
11
possible to change the type of transmission, in
11
order to, as an alternative, attain compatibility with
11
"rolling code" receivers H93/RX2RC/I and R93/
12
RX2RC/U which adopt the RTHSE standard (Roger
12
Technology High Security Encryption). The "rolling
12
code" transmission is recommended for installations
12
requiring a very high level of security, thanks to the
12
144-bit processed through multi-level encryption.
It is possible to store up to 450 user codes, each
13
of which can have a maximum of 6 digits. To store
13
codes you need to know the password, which must
38
be customized during installation in order to ensure
the security of access. By making the password
change, the transmission mode is also started (fixed
or "rolling" code).
When choosing user codes it is recommended to
use up to 5 digits for optimal system security as
well as ease of use; for the more demanding users
who seek maximum security there is a special
mode, which is described in section 6 ADVANCED
FEATURES: MASKING OF THE CODE.
The wireless numeric code keypad exists in three
versions:
• H85/TDR/E: version for wall mounting
• H85/TDR/C: version for mounting on pedestal
• H85/TDR/I: built-in version
Spare part code:
• H85/TDR:
includes all the components shown in Figure 1.
The keyboard is
replacement
wireless
keyboard,
Publicité
Chapitres
Table des Matières
