Codes Du Modèle De Matériel D'installation Pr-23-Ap - Vaisala K-PATENTS PR-23 Manuel D'utilisation

9 Spécifications du capteur
-AX = ATEX and IECEx certified Ex II 3G, Ex nA IIC T4 Gc (up to zone 2) (T
-IA = Ex and IECEx certified Ex II 1G, Ex ia IIC T4 Ga (up to zone 0) (T
-IF = IF certified to US and Canadian standards Class I, Div.1, Groups A, B, C, D T4 (T
+45°C (A)
Sensor housing
-AA = Anodized Aluminium
-SC = Stainless steel AISI 316
Prism wash
-SN = Integral steam nozzle, AISI 316 L
-WN = Integral water nozzle, AISI 316 L
-WP = Integral pressurized water nozzle, AISI 316 L
(A) Available with STR Indicating transmitter and IS isolator only
9.4.2 Codes du modèle de matériel d'installation PR-23-AP
Mounting hardware for PR-23-AP sensor
Part number and description
VFMA-23-PSS = Tank bottom flange for PR-23-AP, MT4 DN 25/1T
VFBP-23-PSS = Tank bottom blind flange for PR-23-AP, MT4 DN 25/1T
VFME-23-VSS = Mount adaptor for PR-23-AP-62-VSS HEXNUT type
VFMF-23-VSS = Mount adaptor for PR-23-AP-62-VSS HEXNUT extended
Model and description
AP = Adapter for PR-23-AP
Sensor type
-T = Sanitary 3A-clamp, 2½ inch, insertion lenght 170 mm
-ZP = Sanitary I-line male (14 WI) 2½ inch, insertion length 178 mm
Material of construction
SS = AISI 316 L
Process connection
-P = MT4 DN 25/1T Tank bottom flange, flush mounted
Insertion length adapter
30 = 30 mm
Prism wash
-SN = Integral steam nozzle, AISI 316 L
-WP = Integral pressurized water nozzle, AISI 316 L
-WN = Integral water nozzle, AISI 316 L
-20...+65°C) -AX
amb
-20...+65°C) (A) -IA
amb
-20 ... -IF
amb
-AA
-SC
-SN
-WN
Part no.
VFMA-23-PSS
VFBP-23-PSS
VFME-23-VSS
VFMF-23-VSS
Model
AP
-T
-ZP
SS
-P
30
-SN
-WP
-WN
95