Yamaha YP20G Manuel Du Propriétaire page 24

0˚C 25˚C
å YAMALUBE 4 (10W-40)
ç SAE #20
32˚F 80˚F
4. Check the oil drain bolt, the oil filler cap and the
O-ring. Replace them if damaged.
5. Install a new gasket and the oil drain bolt and then
tighten the bolt.
Oil drain bolt tightening torque:
17 Nm (1.7 m·kgf, 12 ft·lbf)
6. Add engine oil to the correct level.
5 Correct level
5
Recommended engine oil:
å YAMALUBE 4 (10W-40),
700-110
∫ SAE #30
ç SAE #20
∂ SAE 10W
Recommended engine oil grade:
API Service SE type or higher
Engine oil quantity:
0.6 L (0.63 US qt, 0.53 Imp qt)
NOTICE
Be sure no foreign material enters the crankcase.
7. Install the oil filler cap.
– 19 –
SAE 10W-30 or 10W-40