Connecting Storage Expansions - Avigilon 2.5TB-HD-NVR Guide D'installation

• To see the health of other system components, expand
and select a different component from the System Tree
on the left.
• The table displayed in the workspace lists system
components and their status.
No symbol
• To see the details of a system component, select the
system component from the workspace.
3. Select System on the System Tree to return to the home
page.
For more information about the features in the Server
Administrator, see the Help system provided in the software.

Connecting Storage Expansions

To increase the recording capacity of your Avigilon HD Surveillance
System, you can connect an Avigilon HD NVR Storage Expansion
(HD-NVR-EXP2-x.xTB) to the server.
NOTE: The Avigilon HD NVR server must have an Avigilon NVR
Expansion Card (HD-NVR-EXP2-CARD) installed before
the storage expansion can be connected. Be aware that
server models x.xTB-NVR-EC2 have the expansion card
preinstalled.
1. Connect power to the storage expansion. Ensure the server
is turned off.
2. Connect the storage expansion to the server.
a. Connect one end of the supplied Serial Attached SCSI
(SAS) cable to the storage expansion's primary In port.
10
The system component is running normally.
The system component has an error.
The system component has a critical failure.
The system component status is unknown.