Optional Accessories - Tripp-Lite B118-002-UHD-2 Manuel Du Propriétaire

Optional Accessories

• P569-003-CERT Premium High-Speed HDMI Cable—3 ft.
• P569-006-CERT Premium High-Speed HDMI Cable—6 ft.
• P569-010-CERT Premium High-Speed HDMI Cable—10 ft.
• P569-015-CERT Premium High-Speed HDMI Cable—15 ft.
Installation
Note: The maximum distances referenced to in these instructions have been tested
using 28 AWG Premium High-Speed HDMI cables at a 4K x 2K UHD video resolution of
3840 x 2160 @ 60Hz with 36-bit (12 bits per channel) Deep Color.
1. Make sure the power is turned off for all devices that will be connected.
2. Connect the HDMI source to the Input port on the splitter.
Note: The length of the HDMI cable connecting the source to the splitter must not
exceed 15 ft. (4 m).
3. Connect an available Output port on the splitter to the HDMI Input port of
the display.
Note: The length of the HDMI cable connecting the splitter to the display must not
exceed 15 ft. (4 m).
4. Repeat step 3 for the splitter's remaining Output ports.
5. Connect the included power supply to the splitter, then plug it into a
Tripp Lite Surge Protector, Power Distribution Unit (PDU) or Uninterruptible
Power Supply (UPS).
6. Turn on the power to the HDMI source, splitter and displays.
17-04-361-933663.indb 3
3
5/4/2017 12:27:43 PM