Rules For Safe Operation - Pelonis FZ10-10JRH Guide D'utilisation

READ AND SAVE THESE INSTRUCTIONS
CAUTION
Read Instructions for Safe Operation and Operating Instructions carefully.
WARNING
1. To reduce the risk of fire or electric shock, do not use this fan with any
solid-state speed control device.
2. Do not leave the fan running unattended.
3. This appliance has a polarized plug (one blade is wider than the other). To
reduce the risk of electrical shock, this plug is intended to fit in a polarized
outlet only one way. If the plug does not fit fully into the outlet, reverse the
plug. If the plug still does not fit, contact a qualified electrician. Do not attempt
to bypass this safety feature.
4. If the supply cord is damaged, it must be replaced by manufacturer or its
service agent or a similarly qualified person in order to avoid a hazard.

RULES FOR SAFE OPERATION

1. Never insert fingers, pencils, or any other object through the housing when the
fan is running. Turn the fan to the off position before you move it from one
location to another.
2. To avoid overturning, be sure the fan is on a stable surface when operating it.
3. To reduce the risk of electric shock, DO NOT use the fan by a window.
4. Disconnect the fan when removing the grilles for cleaning.
5. Do not connect power until the fan has been fully assembled.
6. Make sure the voltage of the power supply is the same as shown on the fan
nameplate.
7. Unplug the fan when it's not in use and before cleaning it, moving it, or removing
and replacing parts.
8. Do not operate any fan with a damaged cord or plug. Discard the fan or return
it to an authorized service facility for repairs.
9. Do not run the cord under carpeting. Do not cover the cord with throw rugs,
runners, or similar coverings. Do not route the cord under furniture or appliances.
Arrange the cord away from travelled areas where it will not be tripped over.