Velleman-Kit K8057 Mode D'emploi page 8

Receiver instructions
Use :
The left remote button controls CH1 relay, the right remote button controls CH2 relay. Each relay is equipped with a status
LED.
In '0.5s timer' -mode, a relay will remain on for as long as the remote button is held.
If a timer has been set for a particular channel, the relay will turn on when the button is pushed. When the preset time has
elapsed, the relay will turn off.
A timer can be turned off at any time by pressing the transmitter button again.
As long as the timer is running, the corresponding led will flash.
In 'ON-OFF' -mode, the relay will toggle between ON and OFF every time a button is pushed.
⇒ Extra feature : If both channels are configured as 'timer' , you can press both remote buttons simultaneously to operate
both channels at the same time.
8