Publicité
Les langues disponibles
Les langues disponibles
· Dig an approximate 60cm/ 23.6" deep by 90cm/ 35.4" wide hole. Insert the in
ground base and pour mixed concrete into the hole. Make sure the top plate
is level. Note: Do not get any dirt in the screw threads. Either apply tape over
the holes on both sides of the plate or place the stem bolts in the threads and
remove them when the concrete is almost set.
· Once the concrete has cured, attach the tube to the in ground base using
stem bolts (5) and an allen wrench. Note: The tube is always included with the
umbrella. Make sure it is is aligned correctly.
· Slide the cover over the tube (optional). Refer to outdoor umbrella manual for
further installation and operating instructions.
8
90 cm - 35.4"
Publicité
