Charging Procedure - Ailoria DEPLAQUED Mode D'emploi

water after each use and wipe the housing
with a damp cloth. Sterilize the tooth cleaner
with alcohol if necessary.
• The sonic scaler is protected against water
splashing according to IPX6 protection
standard. However, do not keep the product
under water for a long period of time.
• The product contains a rechargeable battery.
Keep the sonic scaler away from fire and high
temperature to avoid danger.
COMMISSIONING
Charge the sonic scaler before the first use.
Charging time is approximately 2 hours to charge
the sonic scaler before first use or fully discharged
battery.

CHARGING PROCEDURE

The connector for the charging cable is located
at the bottom of the back of the unit. Open the
silicone cap and connect the charging cable to the
sonic scaler. Connect the other end to a power
source (wall socket) using the USB charging adapter
provided. Alternatively, you can also connect the
USB cable to a USB interface (e.g. PC or notebook).
The sonic scaler cannot be used during the charging
process. A red light shines in the transparent base
12