Table des Matières
Publicité
Problem
Photos are blurry
Can not transfer pictures
to the computer
Product functions erratically
or does not function at all
GTroubleshooting
Cause
Lens may be dirty or smudged
Camera moved when picture
was taken
Flash may not have
been charged
You are too close to your subject
USB cord may not be
properly connected
Static electricity may temporarily
stop the electronic function of the
camera and cause picture loss.
For example, walking across the
rug and touching the camera
may create static electricity.
Batteries are weak
or exhausted
Solution
Clean the lens with a soft cloth.
Try to keep the camera steady when
you take pictures.
Wait for flash to fully charge before
you take a picture
.
The focus range is from about
1,2 m (4 ft.) – infinity.
Check cord connections on both your
camera and your computer.
Reset the electronics by removing the
batteries and putting them back in the
in battery compartment.
Replace the worn batteries with four,
new "AAA" (LR03) alkaline batteries.
Publicité
Table des Matières
