Table des Matières
Publicité
2"
1"
2"
SIDE
2"
VIEW
1"
DOOR
LHD S(K,P,W)50
WARNING:
Non-combustible fi nishing material tight to the frame around the
project more than 1" from the face of the door (above the door and sides only). If greater projections
are needed, increase the clearance to the sides and top by 2" for every 1" projection.
If using LHDS(K,P,W)50 surround , then 2" clearance above the frame is required before projecting out
a maximum 2". If greater projections are needed, increase the clearance to the top by 2" for every 1"
of additional projection.
SIDE VIEW
2"
2"
1"
DOOR
35
operating
door must not
W415-0745 / E / 08.15.12
Publicité
Table des Matières
