Using The Remote Control - Dell 3400MP Manuel De L'utilisateur

6
TEMP warning light
7
LAMP warning light
8
Enter
9
Keystone adjustment
10 Up and
11 and buttons

Using the Remote Control

16 Using Your Projector
• If the TEMP light is solid orange, the projector
has overheated. The display automatically shuts
down. Turn the display on again after the
projector cools down. If the problem persists,
contact Dell.
• If the TEMP light is blinking orange, a projector
fan has failed and the projector automatically
shuts down. If the problem persists, contact
Dell.
If the LAMP light is solid orange, replace the
lamp.
Press to confirm the selection item.
Press to adjust image distortion caused by tilting
the projector. (±16 degrees)
Down Press to select the OSD items.
Press to adjust the OSD setting.