Adjusting Storage Shelf Dividers; Adjusting The Cs16Usb Shelf Dividers; Adjusting The Cs32Usb And Cs48Usb Shelf Dividers; Specifications - Tripp-Lite CS16USB Manuel Du Propriétaire

8. Adjusting Storage Shelf Dividers

Your tablet charging station comes with one (CS16USB), two (CS32USB) or three (CS48USB)
storage shelves with adjustable dividers that each can accommodate up to 16 personal electronic
devices per shelf.

8.1 Adjusting the CS16USB Shelf Dividers

Remove any personal electronic devices stored on the shelf tray. Then remove the shelf tray from
the cabinet by unscrewing the four fasteners attached to the two front rack rails. Once the shelf is
removed, rearrange the dividers by pulling them out or snapping them into the shelf tray.

8.2 Adjusting the CS32USB and CS48USB Shelf Dividers

Remove any personal electronic devices stored on the shelf tray. Then unlock and open the rear
door to the cabinet. From the front or rear of the cabinet, rearrange the dividers by pulling them out
or snapping them into the shelf tray. Repeat as necessary for additional shelf trays.

9. Specifications

Model
Dimensions (H x W x D)
Unit Weight
Load Capacity*
Cabinet Mounting Depth
(Adjustable)
Charger/Hub Ports
Transmission Speed
Power Requirement
Operating Temperature
Operating Humidity
Number of Charger/Hub Units
Charger/Hub Dimensions per Unit
(H x W x D)
Enclosure Material
Regulatory Approvals
*Full wall-mount load capacity requires a mounting surface capable of bearing the full load of the tablet charge and sync station and all connected components. Rolling applications
require optional SRCASTER accessory kit. Specifications are subject to change without notice.

10. Optional Casters

An optional caster accessory kit (Model: SRCASTER) is available for purchase through Tripp Lite
(visit www.tripplite.com for details). The SRCASTER Kit's 4 casters and mounting hardware install to
the pre-drilled holes located on the base of the enclosure. For further installation instructions, refer
to the manual included with the SRCASTER Kit.
CS16USB
14.5 x 23.63 x 17.5"
(368 x 600 x 445 mm)
29 lb (13 kg)
200 lb (90 kg)
Stationary or Rolling
3" to 16.5" (76 to 419 mm)
16 x USB 2.0 A (Female)
1 x USB 2.0 B (Female)
1 x USB 2.0 mini (Female)
Up to 480 Mbps
Input: 100-240V, 2.5A, 50/60 Hz
Output: 5.0V, 2.4A Max (per USB
port)
32° to 104° F
0° to 40° C
5 to 95% RH, Non-Condensing
1
1.75 x 17.5 x 9.5"
(45 x 445 x 240 mm)
Metal
UL 60950, TUV (US and Canada),
NOM (Mexico) and RoHS
CS32USB
21.6 x 23.63 x 21.6"
(549 x 600 x 549 mm)
55 lb (25 kg)
200 lb (90 kg)
Stationary or Rolling
3" to 20.5" (76 to 521 mm)
32 x USB 2.0 A (Female)
2 x USB 2.0 B (Female)
2 x USB 2.0 mini (Female)
Up to 480 Mbps
Input: 100-240V, 2.5A, 50/60 Hz
Output: 5.0V, 2.4A Max (per USB
port)
32° to 104° F
0° to 40° C
5 to 95% RH, Non-Condensing
2
1.75 x 17.5 x 9.5"
(45 x 445 x 240 mm)
Metal
UL 60950, TUV (US and Canada),
NOM (Mexico) and RoHS
8
CS48USB
35.6 x 23.6 x 21.6"
(905 x 600 x 549 mm)
96 lb (43.5 kg)
250 lb (113 kg)
Stationary or Rolling
3" to 20.5" (76 to 521 mm)
48 x USB 2.0 A (Female)
3 x USB 2.0 B (Female)
3 x USB 2.0 mini (Female)
Up to 480 Mbps
Input: 100-240V, 2.5A, 50/60 Hz
Output: 5.0V, 2.4A Max (per USB
port)
32° to 104° F
0° to 40° C
5 to 95% RH, Non-Condensing
3
1.75 x 17.5 x 9.5"
(45 x 445 x 240 mm)
Metal
UL 60950, TUV (US and Canada),
NOM (Mexico) and RoHS