Revo WILD COUNTRY Mode D'emploi page 13

loading over sharp edges of rock or equipment or failure to
maintain (clean and lubricate) as recommended.
Textile Components; most textile components used in safety
equipment are known to degrade gradually with time even when
stored in ideal conditions. Additionally normal use, rope burn,
exposure to elevated temperatures, high impact load during
fall arrest, prolonged exposure to UV light including sunlight,
abrasion, cuts, loading over sharp edges of rock or equipment
or failure to maintain (clean) as recommended will cause further
reduction in strength.
PRODUCT MARKING
In addition to the instruction leaflet accompanying this product
the following information is marked on the device:
Individual Serial Number
Month
a. Product Name: REVO
c
Year
Dwg Index No.
b. Manufacturer: Wild Country - OBERALP S.p.A.
Manufacturer
A - FUKO
Via Waltraud Gebert Deeg 4 I-39100 Bozen, Italy
B - Temponi
www.wildcountry.com.
c. Rope compatabilty:
Compatible with single dynamic ropes (EN 892). Commercially
stated rope diameters have a tolerance up to ± 0,2 mm. Rope
diameters and other characteristics may vary with use.
d. Rope Orientation: Visual indication of correct placement of
the rope.
e. Information Pictogram: Read the instructions supplied by
the manufacturer.
f. Patent Pending
g. Batch code
1. Internal reference
2. Year of manufacture (17 = 2017)
3. Month of manufacture (01 = Jan)
4. Individual serial number
h. Product Compliance: EN 15151-1
Type 8: Devices for belaying and abseiling with a panic locking element.
i. Product Compliance: UIAA 129
This confirms that the product has been manufactured in
accordance with the UIAA norm.
j. Country of Manufacture: ITALY
k. Notified Body: Dolomiticert (CE 2008)
The accredited notified body (CE 2008) was consulted during the
design stage of this Wild Country product; Dolomiticert S.c.a.r.l.
Notified Body no. 2008 Z.I. Villanova, 1 32013 Longarone Italy
REVO PRODUCTION BATCH CODE:
B 50 17 06 00001
Individual Serial Number
Month
Year
Dwg Index No.
Manufacturer
A - FUKO
Ø8.5-11.0mm
B - Temponi
d
Ø 8.5-11.0mm
b
A 01 1701 00001
WEIGHT
c
Ø8.5-11.0mm
b
f
h
i
k
275g
d
e
j
g
a