Valentin COMPA II Guide De Référence Rapide page 109

Key:
Buzzer
Display
Key:
Printer language
Key:
Keyboard layout
Key:
Customized entry
Key:
Hotstart
Key:
Autoload
Key:
Manual reprint
Key:
Backfeed/Delay
Key:
Label confirmation
Key:
Standard label
On: An acoustic signal is audible when pressing a key.
Value range: 1 ... 7.
Off: No signal is audible.
Setting of display contrast.
Value range: 45 ... 75.
Selection of language in which you want to display the text in the printer display.
At the moment the following languages are available: German, English, French, Spanish,
Finnish, Czech, Portuguese, Dutch, Italian, Danish, Polish, Greek, Hungarian, Russian,
Chinese (option), Ukrainian, Turkish, Swedish, Norwegian.
Selection of region for the desired keyboard layout. The following possibilities are available:
Germany, England, France, Greece, Spain, Sweden, US and Russia.
Off: No question appears at the display. In this case the stored default value is printed.
On: The question referring the customized variable appears once before the print start at the
display.
Auto: The questions referring the customized variable and the quantity query appear after
every printed layout.
Auto without quantity query: The question referring the customized variable appears after
every layout without additional query for the quantity.
On: Continue an interrupted print order after switching on the printer anew.
Off: After switching off the printer the complete data is lost.
On: A label which was loaded once from Compact Flash card can be loaded again
automatically after a restart of printer.
The last loaded label from CF card is always again loaded after a restart of printer.
Off: After a restart of printer the last used label must be again loaded manually from the
memory card.
A common use of the functions Autoload and Hotstart is not possible.
Yes: I In case an error occurred and printer is in stopped mode then you can reprint the last
printed labels by means of keys
No: Only blank labels were advanced.
Backfeed: The backfeed was optimised in the operating modes dispenser (optional) and cutter
(optional). Now, when driving into the offset, the following label is 'pre-printed' if possible and
therefore the backfeed of label is no necessary and time can be saved.
Delay: The adjustable deceleration time is only for mode Backfeed automatic of importance.
On: A new print order is only printed after confirmation at the device.
An already active continuing print order is printed as long as the confirmation is effected at the
device.
Off: No query appears at the display of control unit.
On: If a print order is started without previous definition of label, the standard label is printed.
Off: If a print order is started without previous definition of label, an error message appears in
the display.
English
and .
Compa II
109