Instruction; Assembly - Sabo SAU17052 Mode D'emploi

Repair
Have your power tool repaired only by a qualified expert and only with original spare parts. This ensures that the power tool remains safe.
· When working with this device, do not touch the fan.
·
Make sure that the device's handles are always clean and dry.
7

INSTRUCTION

· Read the instructions carefully. Familiarise yourself with the operating elements and correct device operation.
·
Never let children, persons with restricted physical, sensory or mental capacity or without experience or knowledge, or persons unfamiliar with these instructions, to use the product.
Local provisions may limit the age of the user.
·
Never use the device if persons, particularly children, or animals are nearby.
·
The operator or user is responsible for accidents with or dangers to other persons or their property.
PREPARATION
·
When using the device, always sturdy shoes and long trousers.
·
Never work with the machine in bare feet or open sandals. Avoid wearing loose clothing or clothing with cords or belts.
· Do not wear loose clothing or jewellery, which could be sucked into the air inlet. Keep long hair away from the air inlets.
·
Wear ear protection and safety goggles. Wear these the entire time you are using the machine.
·
To prevent dust irritations, the use of a face mask is recommended.
·
Use the machine only on a solid, flat base. Avoid abnormal postures.
·
Do not use this machine on a paved surface or on gravel, where material can be disturbed and lead to injuries.
·
Before use, always perform a visual inspection in order to ensure that all closures are secure, the housing is not damaged and all safety equipment is fitted. Replace worn or damaged
parts. Replace damaged or illegible labels.
OPERATION
·
Working technique
Slightly angle the nozzle down and proceed slowly
o
Swing the appliance right and left in order to blow away the swept leaves.
o
·
Only use the machine in daylight or good artificial light.
·
Beware of slopes and steps on a solid base.
·
Walk, do not run.
·
Keep all air inlets free of dirt.
·
Never blow leaves towards people.
·
Before starting the machine, make sure the nozzle is empty.
·
Keep your face and body away from the nozzle opening.
·
Do not place your hands or other parts of your body or clothing in the nozzles, the ejector shaft or close to moving parts.
·
Check the device before use to ensure that there are not foreign objects or dirt in the machine.
·
Do not use expose the machine to rain when in use. Do not use the device in bad weather if there is a danger that lightning could strike.
·
Do not place your hands, other parts of your body or clothing in or in front of the nozzles or close to moving parts.
·
Never use the machine with defective protective equipment, shields or fitted safety equipment.
·
In order to prevent damage to the motor or a resulting fire, keep the motor free of foreign objects or other deposits.
·
Always keep away from the outlet area when using this machine.
·
Do not over-estimate yourself. Always make sure you have a firm stance. This allows better control in unexpected situations.
·
Stop the machine and remove the battery. Ensure that all moving parts have come to a complete stop:
if the machine is left unsupervised.
o
before removing the blockages
o
before you inspect or clean the machine or carry out work on it.
o
to inspect the device after strong contact with an object
o
if the machine starts to vibrate strangely (immediate inspection necessary).
o
CARE AND STORAGE
·
Take care to ensure that the device is in a safe working condition, that all screws, nuts and bolts are tight.
·
Replace worn or damaged parts.
·
Only use original spare parts and accessories.
·
Store the device in a dry location and out of the reach of children.
·
Do not touch dangerous, moving parts before the machine has stopped and the dangerous, moving parts have come to a complete stop.
·
Always allow the machine to cool before putting it away.
·
Never try to disable the protective equipment locks.
·
Store the device indoors and do not expose it to rain or water and keep out of direct sunlight.
8

ASSEMBLY

UNPACKING
·
Carefully remove the product and accessories from the box.
·
Carefully inspect the product and make sure that no damage has occurred during the transport.
·
Do not immediately dispose of the packaging material until you have carefully inspected and successfully used the product.
·
If parts are damaged or missing, please contact the retailer.
23