Cleaning And Maintenance - Hortensus HOR-EPH1500W Manuel Du Propriétaire

INSTALLATION
Please check all the items against the parts list after opening the box. Only all the items are
complete, the installation could be followed.
Step 1
Step 5
Operation

CLEANING AND MAINTENANCE

1) Always turn off and unplug the heater before cleaning.
2) To clean the heater, use a damp cloth and make sure to dry excess water once cleaned.
*ATTENTION Do not put the heater directly into any container with water in it.
Step 2
Top
Down
Middle 2x
Step1：Fix down pole on base by clockwise rotation, then feed the
cable from base to pole.
Step2：Rotate 2 middle poles clockwise into down pole, then
connect top pole by same way. Run the cable though all the poles.
Step3: Connect the plug on the heater head to the power cable
plug. Install the clip as illustration.
Step4: Push the heater head onto the pole, aligning the holes on
the heater head and the tube. Once aligned, fix in position using 2
screws.
Stop5: Fix power cable to the base by unscrewing the 4 screw
from plastic fittings. Secure the cable by screwing 4 screw.
" " for 1500W
" " heater OFF
Step 3 Step 4