Inserting Batteries - Remington NanoSeries Groom Essentials NE3455 Mode D'emploi

Masquer les pouces Voir aussi pour NanoSeries Groom Essentials NE3455:
Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 15
ENGLISH
C GETTING STARTED

, INSERTING BATTERIES

Your NE3455 requires 1 'AA' alkaline battery (first one included).
We recommend that you use VARTA® batteries.
Ensure the product is switched off.
Rotate the battery compartment cap approximately ¼ turn anti-clockwise
then pull off.
Insert the battery so that the (+) and (-) marks on the battery face the same
mark in the battery compartment.
Place the cap back on the unit using the alignment marks and rotate
clockwise until the cap snaps into place.
, Note: your trimmer will not work if the batteries are inserted incorrectly.
, Note: remove batteries if the unit is not in use for long periods.
, Note: the vertical trimmer head housing has a Nano Silver Antimicrobial
coating for hygienic trimming.
, TURNING ON THE TRIMMER
The On/Off switch is integrated into the battery cap.
Rotate the battery cap clockwise to turn on.
To turn off, simply rotate the battery cap anti-clockwise to the off position.
INSTRUCTIONS FOR USE
F
, Note: your trimmer has been designed to be used in the shower if desired.
, TO REMOVE HAIR FROM NOSE
Insert groomer's cutting unit gently into the nostril.
Gently move the groomer in and out of the nostril and at the same time
rotate the groomer.
Avoid inserting the cutting unit more than 6mm into your nostril.
, TO REMOVE HAIR FROM EYEBROWS
For trimming, attach one of the attachment combs onto the vertical linear
trimmer
Gently guide the cutting unit to stray, unwanted hairs along the eyebrow line
or protruding from the eyebrow itself.
To remove the hairs completely, remove the attachment comb and lower
the trimmer onto the skin and move over desired area.
Use slow and well-controlled movements.
4

Publicité

Table des Matières
loading

Table des Matières