Bigben BT12 Mode D'emploi page 9

Note:
1. If the pairing is not successful, turn off speaker and re-pair again.
2. After successful pairing, paired devices will remember each other. Unless pairing information is
deleted, no need to pair when use next time.
3. Pair with new device according to steps 1-5 above after disconnecting existing pair.
Re-connecting to a paired device
If the speaker does not connect to the last used device automatically, then you will need to select it
manually from the list of devices on your mobile device.
Lighting effect-9 lighting modes
1. Short press to change different led lighting mode.
2. Press and hold for 2 seconds to turn on/off the led lighting effect
HAND-FREE, NEXT/PREVIOUS
1. Short press "Hand-free" to answer phone call, short press again to end a call.
2. Long press "Hand-free" button to enter the pairing mode.
3. Press NEXT to go to next song.
4. Press PREVIOUS to go back to previous song.
Play/Pause
Short press Play/Pause to pause, press again to play.
Volume-/Volume+
1. Rotate clockwise of the top part to increase the volume, rotate anti-clockwise to decrease the
volume.
2. There is indicate sound when the volume increased to the MAX.
Connecting external devices (AUX port)
1. You can connect AUX port to any music devices via the AUX cable included.
2. When connect with AUX in line, LED turn to solid RED with indicate sound.
3. Then play music through the devices connected.
Specifications (subject to be changed without pre-notice)
Produce Name: Bluetooth speaker with LED light
Model No.: BT12
Input: DC 5V
Speaker driver: 1 x 1.75'' 4ohm
Battery: 3.7V 2200mAh
Power output: 3W x 1
- EN 3 -