Switching On/Off; To Switch The Tv On; To Switch The Tv Off; Input Selection - AYA A 40 CC 4001 Mode D'emploi

Switching On/Off

To Switch the TV On

• Connect the power cord to the 220-240V AC, 50 Hz.
Then the standby LED lights up (The led will blink
during the standby On/Off).
To switch on the TV from standby mode either:
•
Press the " " button, CH
•
button on the remote control.
" button, P/CH- or P/CH+ button on
Press the "
•
the TV. The TV will then switch on.
Note: If you switch on your TV via CH
buttons on the remote control or on the TV set,
the programme that you were watching last will be
reselected.
By either method the TV will switch on.

To Switch the TV Off

Press the " " button on the remote control or hold
•
the "
" button on the TV until shut down , so the
TV will switch to standby mode.
To power down the TV completely, unplug the
•
power cord from the mains socket.
Note: When the TV is switched to standby mode,
standby LED can blink to indicate that features such
as Standby Search, Over Air Download or Timer is
active.

Input Selection

Once you have connected external systems to
your TV, you can switch to different input sources.
Press "SOURCE" button on your remote control
consecutively for directly changing sources.
(optional)
Note: YPbPr mode can be used only when you
connect a device that has a YPbPr output through the
PC input with YPbPr to PC cable (not supplied).
or CH or a numeric
or CH
English - 51 -

Basic Operations

You can operate your TV using both the remote
control and onset buttons.

Operation with the Buttons on the TV

Volume Setting

Press " " button to decrease volume or "
•
" button to increase volume, so a volume level scale
(slider) will be displayed on the screen.

Programme Selection

Press " P/CH +" button to select the next programme or
•
"P/CH -" button to select the previous programme.

Viewing Main Menu

Press "
• " / "
to view main menu. In the Main menu select sub-
menu using "P/CH -" or "P/CH +" buttons and enter
the sub-menu using "
To learn the usage of the menus, refer to the menu
system sections.

AV Mode

Press the " TV/AV" button in the control panel on the
•
TV to switch between AV modes.

Operation with the Remote Control

The remote control of your TV is designed to control
•
all the functions of the model you selected. The
functions will be described in accordance with the
menu system of your TV.
Volume Setting
Press " V " button to increase the volume. Press "V
•
" button to decrease the volume. A volume level
scale (slider) will be displayed on the screen.
Programme Selection (Previous or Next
Programme)
Press CH button to select the previous
•
programme.
Press CH button to select the next programme.
•

Programme Selection (Direct Access)

Press numeric buttons on the remote control to select
•
programmes between 0 and 9. The TV will switch
to the selected programme. To select programmes
between, press the numeric buttons consecutively.
When the pressing time is due for the second
numeric button, only the first digit programme will
be displayed. Press directly the programme number
to reselect single digit programmes.
" buttons at the same time
" or " " buttons.