FLORABEST FTP 400 D3 Traduction Des Instructions D'origine page 8

GB IE
• The transportation of aggres-
sive, abrasive (grinding ef-
fect), corrosive, combustible
(e.g. motor fuels) or explosive
liquids, salt water, cleaning
agents and foodstuffs is not
permitted. The temperature of
the liquid being transported
must not exceed 35°C.
• Store the equipment in a dry
place and out of reach of chil-
dren.
Caution! To avoid damage
to the equipment and any
possible person injury result-
ing from this:
• Do not work with damaged or
incomplete equipment, or with
equipment that has been con-
verted without the approval of
the manufacturer. Before initial
operation, have a specialist
check that the required electri-
cal protection measures are in
place.
• Monitor the equipment dur-
ing operation (particularly in
residential spaces, in order to
detect automatic switching off
or dry running of the pumps
in time. Regularly check the
function of the float switch (see
chapter "initial operation").
Non-observance will invalidate
all guarantee and liability
claims.
8
• Please note that the pump is
not suitable for continuous op-
eration (e.g. for watercourses
in garden ponds). Check the
equipment regularly for correct
functioning.
• Note that the lubricants used
in the equipment may cause
damage or contamination if
they escape. Do not use the
pump in garden ponds with
fish stocks or valuable plants.
• Do not carry or fix the equip-
ment by the cable or pressure
line.
• Protect the equipment from
frost and from running dry.
• Use only original accessories
and do not carry out conver-
sion work on the equipment.
• Please read the notes in the op-
erating instructions on the topic
of "maintenance and clean-
ing". Any measures above
and beyond these, particularly
opening the equipment, are to
be carried out by an electri-
cian. In the case of repairs,
always contact our service cen-
tre.