Before Use; Safety Instructions - JB Systems Light TWINBEAM COLOR Mk3 Laser Mode D'emploi

ENGLISH
OPERATION MANUAL
Thank you for buying this JB Systems
safety, please read these operating instructions very carefully before you start using this unit.
FEATURES
This unit is radio-interference suppressed. This product meets the requirements of the current European and
national guidelines. Conformity has been established and the relevant statements and documents have been
deposited by the manufacturer.
 This device has been designed to produce decorative effect lighting and is used in light show systems.
 Produces 2 synchronized laser beams
 Generates dynamic 3 color laser shows, perfect for fixed and mobile installations.
 RGY (Red, Green, Yellow) Class 3B Laser
o 650nm Red 150mW beam
o 532nm Green 150mW beam
o Mixed Yellow 300mW beam
 The color of the beams changes all the time using laser blanking technology.
 Several working modes:
o DMX controlled, 1 or 9 channels
o Stand-alone with built-in microphone
o Stand-alone automatic mode
 Preprogrammed multi-color laser shows
 DMX-addressing with LED display
 Complies to EN/IEC 60825-1 for Laser Safety

BEFORE USE

 Before you start using this unit, please check if there's no transportation damage. Should there be any, do
not use the device and consult your dealer first.
 Important: This device left our factory in perfect condition and well packaged. It is absolutely necessary
for the user to strictly follow the safety instructions and warnings in this user manual. Any damage caused
by mishandling is not subject to warranty. The dealer will not accept responsibility for any resulting defects
or problems caused by disregarding this user manual.
 Keep this booklet in a safe place for future consultation. If you sell the fixture, be sure to add this user
manual.
Check the contents:
Check that the carton contains the following items:
 TWIN BEAM COLOR Mk3 Laser unit
 2 keys (for key switch)
 Mains cable
 Operating instructions

SAFETY INSTRUCTIONS:

CAUTION
The lightning flash with arrowhead symbol within the equilateral triangle is intended to alert the use
or the presence of un-insulated "dangerous voltage" within the product's enclosure that may be of
sufficient magnitude to constitute a risk of electric shock.
The exclamation point within the equilateral triangle is intended to alert the user to the presence of
important operation and maintenance (servicing) instructions in the literature accompanying this
appliance.
This symbol means: indoor use only.
JB SYSTEMS
®
®
product. To take full advantage of all possibilities and for your own
CAUTION: To reduce the risk of electric shock, do not remove the top cover.
No user-serviceable parts inside. Refer servicing to qualified service
personnel only.
1/57 TWIN BEAM COLOR Mk3 Laser
USER MANUAL