Dc Power Connection 12 V / 24 V; Mounting Using Din Sleeve - Albrecht AE 6491 VOX Manuel

made from plastic or fi berglass or where a grounding is
not possible. Such antennas do only work on fi berglass or
plastic car body structures and do not work immediately on
metallic structures.
• Do not use any transmit function (e.g. PTT) before installing
the antenna

4.2. DC power connection 12 V / 24 V

The AE 6491 VOX version can operate at both 12 or 24 V voltage
systems. A switching is not necessary.

4.3. Mounting using DIN Sleeve

Before installing, confi rm that this radio fi ts in the desired
mounting area and you have all the necessary kits to complete
the installation
• Remove the bracket if previously installed.
• Install DIN Sleeve into the opening in your dashboard, lip
facing out.
• Push out the top and bottom tabs to hold the sleeve fi rmly
in place.
• Before inserting this radio in the sleeve, wire the cable from
the previously mounted antenna
• Connect the DC power leads. The RED wire goes to a
positive( + ) connection on your fuse block, while BLACK
33