Levelling The Canopy (Optional) - CARAVITA BELVEDERE Instructions De Montage Et D'utilisation

5.3

Levelling the canopy (optional)

The canopy can be levelled. The mechanism is not intended to position the canopy at a slant. The inclination of the canopy is
adjusted using two adjusting screws that are located behind the cover panels at the upper end of the arm.
Preparation
1 Select the direction of the inclination when the parasol is open.
2 Close the parasol.
3 Have the tools ready.
1x Phillips screwdriver
I
1x hex key 6 mm
I
2x installation spanners 13 mm
I
Levelling the canopy
4000258 [v0]/2022-01-01
The counter nuts on the turnbuckle are open.
1 Hold the cable on the threaded terminal using pliers.
2 Turn the adjuster with pliers or a splint.
Right-hand rotation = tension increases.
I
Left-hand rotation = tension decreases
I
3 Secure the adjuster using the counter nuts.
Model with vent
1 Loosen one part of the vent cover on the pole side from the ribs until the
adjusting screw can be accessed.
Model without vent
1 Loosen the parasol fabric on the pole side from the ribs until the adjusting
screw can be accessed.
Operation
35 | 88