Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

Features

Top Panel

1.
Browse Knob: Rotate this knob to cycle through folders and tracks. Press the knob to cycle
between the Crates and Library.
Hold Shift and rotate the knob to quickly scroll through tracks and folders.
2.
Load: Press one of these buttons while a track is selected to assign it to the active Left or Right
deck. Quickly double-press a Load button to assign the same track on both active decks.
3.
Level: Adjusts the pre-fader, pre-EQ audio level of the corresponding channel.
4.
Treble EQ: Controls the treble frequencies for the individual channels.
5.
Mid EQ: Controls the mid-range frequencies for the individual channels.
6.
Bass EQ: Controls the bass frequencies for the individual channels.
Filter: Adjusts the amount of the filter effect. Turning the knob left and right will produce a low-
7.
pass filter and high-pass filter, respectively.
8.
Headphone Cue: Sends pre-fader audio to the cue channel for headphone monitoring.
9.
Channel Fader: Adjusts the volume of the individual channels in the software.
10. Main Output LEDs: Displays the audio level going to the Main Output.
11. Crossfader: Controls the blend between the two decks.
12. Cue Gain: Adjusts the volume for headphone cueing.
13. Cue Mix: Adjusts the audio output to the headphones, mixing between the cue output and the
master mix output.
14. FX Wet/Dry Knob: Turn this knob to adjust the wet/dry mix of the effects.
15. Beats Multiplier: Increases and decreases the rate of the effects to the beat. When using a
time-based effect, this knob adjusts its time division.
16. Tap BPM: Press this button 4 or more times to manually enter a new BPM. The software will
ignore the track's BPM and follow your manually entered tempo.
Press Shift and this button to reset the tempo to the track's default BPM.
17. Software FX: Press one of these buttons to select a software effect.
HPF (High pass filter)
LPF (Low pass filter)
Flanger
4
2
1
2
3
3
4
4
5
5
6
6
7
7
8
8
10
10
3
3
4
4
5
5
6
6
7
7
8
8
Echo
Reverb
Phaser

Publicité

Table des Matières
loading

Table des Matières