Leuze BCL 92 SM 300 Mode D'emploi page 22

EN
Safety
This sensor was developed, manufactured and tested in line with the applicable
safety standards. It corresponds to the state of the art.
Intended use
Bar code readers of the BCL 92 and BCL 95 series are conceived as stationary
scanners with integrated decoder for all current bar codes used for automatic ob-
ject detection.
Areas of application
The bar code readers of the BCL 92 and BCL 95 series are designed for the fol-
lowing areas of application:
– Automatic analyzers
– Robotics and automation technology
– Material flow
– Labeling and packaging machines
– For space-critical bar code reading tasks
– Applications with large reading field with small modules
CAUTION
Observe intended use!
The protection of personnel and the device cannot be guaranteed if the
device is operated in a manner not complying with its intended use.
Ä
Only operate the device in accordance with its intended use.
Ä
Leuze electronic GmbH + Co. KG is not liable for damages caused
by improper use.
Ä
Download the device operating instructions: www.leuze.com
Ä
Read this supplement and the operating instructions for the device
before commissioning the device. Knowledge of these documents
is required in order to use the equipment for its intended purpose.
NOTICE
Comply with conditions and regulations!
Ä
Observe the locally applicable legal regulations and the rules of
the employer's liability insurance association.
Foreseeable misuse
Any use other than that defined under "Intended use" or which goes beyond that
use is considered improper use.
In particular, use of the device is not permitted in the following cases:
– in rooms with explosive atmospheres
– in circuits which are relevant to safety
– for medical purposes
22