Publicité
Les langues disponibles
Les langues disponibles
Industrial Lifter HAMMER 50
Manual in ENGLISH
1. INTRODUCTION.
Dear user. Thank you purchasing your Kuzar Industrial HAMMER 50 lifter. We hope you will be very
satisfied with it.
This manual has been written so that you can understand how to effectively use the lift and most
importantly, so that you can use it safely. It is important that you fully read the manual and follow the
instructions carefully before using your lift.
All Kuzar Industrial lifts undergo a very strict quality control process during their manufacture. So
that your lift always works properly please only purchase original Kuzar Industrial parts from an
authorized distributor or dealer. The user waives all warranty rights if using parts other than Kuzar
Industrial or if the product is manipulated in any way by an unauthorized third party.
When requesting parts, please refer to the diagrams of this manual and quote the serial num-
ber and year of manufacture located on your lifter.
2 - TECHNICAL SPECIFICATIONS.
The HAMMER 50 Lifter has been designed for vertically lifting loads, and horizontal movements with
the load lifted at minimum height.
2.1 - Max. load: 200 kg
2.2 - Min. load: 25 kg
2.3 - Security system: Inertial Brake System by Kuzar Industrial
2.4 - Max. height:
Forks upper position: 5.0m
Forks lower position: 4.44m
2.5 - Folded height: 1.555 m
2.6 - Work surface: 1.47 x 1.40 m
2.7 - Folded surface: 0.635 x 0.84 m
2.8- Weight: 111 kg
2.9 - Load support: Forks 54,5cm.
2.10 - Construction material : 6082-T6 alluminium for the main body, comprised of 5 profiles and a
lifting carriage. Base and legs are made of steel profile according to DIN 2394. Catches and pulleys
of F-114 steel.
2.11 - Winch: 900 Kg. maximum load with automatic brake. Certification CE and GS TÜV.
2.12 - Cable: Steel DIN 3060. Tensile strength 180 kg/mm
. Anti-torsion & anti-corrosion.
2
Ø5mm cable diameter.
KUZAR SYSTEMS S.L.
2
Publicité
