HUUM DROP Mode D'emploi page 5

Output
Table 1
kW
DROP 4.5 4.5
DROP 6 6
DROP 9 9
Connecting the heater to the power supply
• Only a certified electrician is allowed to connect the heater to the
power supply.
• A rubber insulated SIHF-JB cable or an equivalent cable must be
used as the connection cable.
• It is recommended to connect the unit to the mains without an
earth-leakage circuit breaker.
• The maximum current intensity in the cross-sectional area of the
cable and circuit breaker are listed in Table 2.
Room A
m mm
3
3–7 100
5–10 120
8–15 150
B C
mm mm
590 435
630 455
690 485
D E Min gap
mm mm
170 310 1200
190 310 1200
220 310 1200
mm
5