Arenti VBELL 1 Guide Rapide page 6

EN
EN
Notice
If you have multiple cameras, please follow step 5 again
to add devices one by one.
To change Wi-Fi network, please restore the camera to
factory settings and follow step 5 to add the camera.
Chime Pairing
1. Short press "
red slowly and the chime will be in pairing mode.
2. Press the doorbell button to pair, when the chime status
light turns off, and the song will play automatically, the
chime pairing is successful at this time.
Description:
1. The chime can connect to maximum eight doorbells.
2. When the chime is in pairing mode, press the "
(within 2 seconds), the chime will automatically exit the
pairing mode.
3. After adding the chime successfully, the volume will be
adjusted to the maximum automatically. When it is at the
minimum volume, it will return to the maximum volume
after pressing "
4. Each press "
blue light.
" (within 2 seconds), the status light flashes
During pairing mode, it will blink red
".
", will play the next song along with blinking
When playing ringtone,it will blink blue
" again